Pro-ject Debut Carbon EVO Turntable(High Glossy Black) with MITMAT Isolation Turntable Platter Mat 300mm-3mm- Bundle
Pro-Ject Debut Carbon Evo (Matte Black): The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design. Redesigned motor suspension. Anytime the perfect stand, Controlled playback speeds & Damped from the inside
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Technical Specifications
Nominal speeds 33/45 r.p.m.. *** 78 r.p.m. optional
Speed variance 33: ±0.50% 45: ±0.60%
Wow and flutter 33: ±0.17% 45: ±0.15%
Signal to noise 68dB
Effective tonearm mass 6g
Effective tonearm length 8.6 " ( 218.5 mm)
Overhang 18,5 mm
Power consumption 4 W/ 0 W in Stand-By
Outboard power supply 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
Dimensions (W x H x D) 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
Weight 5,6 kg
Dimensions packaging (W x H x D) 488 x 235 x 393 mm
Weight incl. packaging 8.0kg
-----
MM-Cartridge Ortofon 2M Red:
Frequency range 20-22.000Hz
Channel separation 22dB/1kHz
Output voltage 5.5mV
Recommended load impedance 47kohms/amplifier connection – MM-input
Compliance/stylus type 20µm/mN – elliptical
Recommended tracking force 17.5mN
Weight 7.2g
MITMAT Isolation Turntable Platter Mat:
DESIGNED AND MANUFACTURED IN CANADA ! 3MM THICK iSOLATION MAT, IMPROVES DETAIL ,CLARITY.AND AUDIO RESOLUTION.
ONLY HEAR WHATS IN THE GROOVE HEAR AND NOTHING ELSE!
Microcell rigidized foam damps low-frequency resonance, reducing it by 3-10 dB Micrometer-flat sandwich layers top and bottom constrain resonance and damp mid-to-high frequency platter ringing by up to 20 dB The 300 mm MITMAT diameter carries LPs around their outer lip and around the label ridge, providing superb support and protection during play – no spindle/center weight or clamp is needed or recommended. Your turntable motor will thank you! MITMAT's reduction of low-level noise and ringing help you hear only what's in the groove MITMAT's 3mm thickness is ideal for most tonearm setups when replacing any stock platter mat between 2-5 mm No label recess means the MITMAT is consistent in thickness through the crucial label/spindle area, providing equally consistent resonance damping across its entire surface
The MITMAT Platter Mat Description
•The 3 mm platter mat is completely flat for maximum contact with the platter and ideal for most tonearm setups, replacing stock mats between 2-5 mm.The 3 mm thickness will have minimal, if any, affect on the Vertical Tracking Angle (VTA).
•The 300 mm* MitMat diameter carries LP’s around their outer lip and around the label ridge, providing superb support and protection during play. No spindle/centre weight is needed.
•No label recess ensures the MitMat is consistent in thickness through the crucial label/spindle area, ensuring equally consistent resonance damping across the entire surface of the mat.
•The microcell technology not only absorbs but also spreads the tremendous localized vibrational energy from the stylus/groove interaction uniformly across the entire mat without peaks/and valleys, down into the platter where the excess vibrational energy is “drained away” as heat.
•The material is also highly effective in reducing static
